INNOVACAR D3 TAR 500ml

• Product that dissolves tar, asphalt and road dirt: it is a water-based degreaser developed to capture road residue and decontaminate it, dissolving stubborn and oily dirt, thereby helping the cleaning process.
• Car resin remover: it is also effective on organic contaminants, such as tree resin.
• Suitable forremoving glue and adhesive and tape residues from car bodywork: it is the ideal product to apply after the removal of a sticker, tape or to remove adhesive residues from wrapping, films (also PPF) or to remove adhesive residues on windows or bodywork.
• Slow evaporation = longer effect: thanks to the aqueous base, the product takes longer to evaporate than the solvent-based solutions on the market. This allows the cleaning formula to act on dirt stains for longer, making the cleaning process more effective and deep.
• Gentle on the surfaces: D3 is totally free of petroleum distillates and therefore preserves the treated surfaces, making it suitable for surfaces with nanotechnological protections. Thanks to its unique formula it allows better adhesion of the molecules of the coating giving longer-lasting protection.

Average consumption: 100 ml per vehicle.

Summary technical data:

• Cleaning action: 5/5
• Tar decontamination: 5/5
• Resin decontamination: 4/5
• Glue decontamination: 4/5
• Surface safety: YES

• Decontaminate bodywork and glass as tar remover from tar and asphalt stains, resin, glue and road contamination.
• Decontaminate the surface and purify it, avoiding interaction with a coating or nanotechnological protection process, already applied or to be applied.
• Achieve deep cleaning by reducing the need for mechanical action and excessive rubbing.
• Gently treat the bodywork and delicate surfaces of the vehicle, such as gaskets and hard plastics.
• Deep decontamination but with a safer solution than those on the market based on hydrocarbons.

How to remove tar from the bodywork, glue and adhesive residue and resin from windows and from the vehicle with D3 Tar:

1. Spray the product directly on the stain to be removed and proceed by panels to prevent the product from drying.
2. Wait for the product to react, from 2 to 5 minutes.
3. If the dirt is stubborn, wipe with a microfibre cloth until it is completely eliminated or rinse with plenty of water.
4. In case of stubborn dirt, repeat the step until it is completely clean.

Use: use the product undiluted.

Precautions: Do not allow the product to dry and do not apply in the sun or on hot surfaces. Use on painted windows and body parts. Do not use on PPF films, wrapping or freshly painted surfaces or on cars with spot repairs.